address of company cornell oil%26amp;drilling co,122 shogbamu road lagos,nigeria phone-2348037304229I was offered a site engineer post in cornel oil%26amp;drilling co in nigeria lagos,is it exist or a scam?
It is a Nigerian scam, ignore it. Don't send them any reply and don't lose your money.
Take care.I was offered a site engineer post in cornel oil%26amp;drilling co in nigeria lagos,is it exist or a scam?
maybe scam.
call the embassy there and ask them...
*Think not only 10 times but 100times before going to Nigeria !!!!!!!!
Not a safe country at all !!!!
forget it
don't even sleep in the direction of nigeria!!!!!!!
If it isn't an internationally reputable company, be very careful.
Do not even reply to the ad.
Even if the ad was legitimate, many people (including Westerners) who work in the Nigerian oil sector have been targets for kidnappings in recent years.
did u apply for the job you cannot get a job which you did not apply for. i cant say for sure but in all probability its a scam.
I found this link that seems to say they are based in Texas.
http://goliath.ecnext.com/coms2/product-鈥?/a>
Be very careful with phoning companies, as you could get charged a great deal for the call and no job at the end of it.
If you have serious doubts about this company, then leave well alone.
Wednesday, August 18, 2010
I have been offered a job in Ste Ascon oil Benin in Mechanical Engineer. How can I check its authenticity ?
One day I got an email from some who asked me to send my resume for a good job in Benin. I did so. Then, I got a questionaire to send replies. I again did so. Next day I was informed that I have been offered a job in an oil company (Ste Ascon oil) AND ASKED ME TO SEND $ 1450 FOR PROCESSING FEE RELATING TO WORK / VISA PERMIT. Is it correct ? Can some one reply.I have been offered a job in Ste Ascon oil Benin in Mechanical Engineer. How can I check its authenticity ?
It's a scam. there have been many questions here at Yahoo on similar emails. It's just another way to get you to send money. There is no job, there never was. When a company is willing to pay you a huge salary, but somehow won't pay for the visa fees, clearly it's a scam.I have been offered a job in Ste Ascon oil Benin in Mechanical Engineer. How can I check its authenticity ?
hi to veryone i got also a job offer by same company. Michelle Merenski 562 River Road Cos Cob 06807 CT UNITED STATES milandolukeman@yahoo.com +1.7185638467 is playing and is sending in the name of Ste Ascon oil Benin job offers to person! i hope this will help to stop this person. Report Abuse
you know it is a scam you never applied for the job I ask myself is it any wonder we get scams like this if ppl are so gullible to think the information is in fact kosher. if ppl stpped replying and even worse falling such obvious scams we will all continue to recieve them every one of these so called offers of a job are a load of bollocks and as such should be scratched
If you did not apply, and if they want money, it is a scam
I am a senior staff in Ascon Oil Company Limited. Ascon Oil is located in Nigeria, with Head office in Lagos and branch offices in various states in Nigeria. If this person who is demanding money from you is talking about Ascon Oil Company Limited in Nigeria, that person is fake and he is not a representative of our company. Job are only offered through our Human Resources Department (H R) or contracted to another HR company by them. So please ignore this person, because Ascon Oil will not request for money from anybody before giving you a job. I got this information through Google alert and we get a lot of fake and strange things like this all the time. Be careful with your money.
Sounds a little fishy to me. Most companies would pay the money themselves if they wanted to hire a foreigner.
It's a scam. there have been many questions here at Yahoo on similar emails. It's just another way to get you to send money. There is no job, there never was. When a company is willing to pay you a huge salary, but somehow won't pay for the visa fees, clearly it's a scam.I have been offered a job in Ste Ascon oil Benin in Mechanical Engineer. How can I check its authenticity ?
hi to veryone i got also a job offer by same company. Michelle Merenski 562 River Road Cos Cob 06807 CT UNITED STATES milandolukeman@yahoo.com +1.7185638467 is playing and is sending in the name of Ste Ascon oil Benin job offers to person! i hope this will help to stop this person. Report Abuse
you know it is a scam you never applied for the job I ask myself is it any wonder we get scams like this if ppl are so gullible to think the information is in fact kosher. if ppl stpped replying and even worse falling such obvious scams we will all continue to recieve them every one of these so called offers of a job are a load of bollocks and as such should be scratched
If you did not apply, and if they want money, it is a scam
I am a senior staff in Ascon Oil Company Limited. Ascon Oil is located in Nigeria, with Head office in Lagos and branch offices in various states in Nigeria. If this person who is demanding money from you is talking about Ascon Oil Company Limited in Nigeria, that person is fake and he is not a representative of our company. Job are only offered through our Human Resources Department (H R) or contracted to another HR company by them. So please ignore this person, because Ascon Oil will not request for money from anybody before giving you a job. I got this information through Google alert and we get a lot of fake and strange things like this all the time. Be careful with your money.
Sounds a little fishy to me. Most companies would pay the money themselves if they wanted to hire a foreigner.
Do any one know about the job offer offered by ROSNEFT OIL CO. he offers me the Process Engineer job in LONDON
IF yes %26amp; it is not a SCAM then please inform me on my id friend_navaid@rediffmail.comDo any one know about the job offer offered by ROSNEFT OIL CO. he offers me the Process Engineer job in LONDON
SCAM
Have they asked for any money yet ?
SCAM
Have they asked for any money yet ?
Can u search for Jones Smith working as engineer on Dunlop gas oil and marine ltd..?
Jones Smith is living in Grimsby UK..He is working as engineer in Dunlop gas oil and marine ltd..for 5 years...He has a email add jones_smith2015@yahoo.comCan u search for Jones Smith working as engineer on Dunlop gas oil and marine ltd..?
You could try writing to the company directly
Dunlop Oil and Marine Ltd
Moody Lane
Pyewipe
Grimsby
DN31 2SY
South Humberside
Tel: +44 (0) 1472 359281
Fax: +44 (0) 1472 362948
Number of Employees: 101 - 250
www.dunlop-oil-marine.co.uk
However, if you received an e-mail offering you a job from someone who only gives a yahoo address then it is a scam.
You could try writing to the company directly
Dunlop Oil and Marine Ltd
Moody Lane
Pyewipe
Grimsby
DN31 2SY
South Humberside
Tel: +44 (0) 1472 359281
Fax: +44 (0) 1472 362948
Number of Employees: 101 - 250
www.dunlop-oil-marine.co.uk
However, if you received an e-mail offering you a job from someone who only gives a yahoo address then it is a scam.
Can anyone tell me, being a Chemical Engineer, whether Indian Oil Corporation is worth to Join as a fresher ??
I have come to know that even though it offers package around 5.65 lac per annum but you merely get 20K per month and posted in the most secluded part of India.
please help......and tell me other good organisations to start my career.Can anyone tell me, being a Chemical Engineer, whether Indian Oil Corporation is worth to Join as a fresher ??
You get the details of the package before hand. It is not wrong to ask for the same before joining. It has become a practise to show high salary package but turn out to be useless as they calculate in terms of the cost to the company. For a fresher, if you get a chance to join there but see the prospects. If there is any bond, think before you leap. Otherwise you do not ask individuals, you try yourself only. You may be misled by others also.
Being a public sector, I hope, it is okay.Can anyone tell me, being a Chemical Engineer, whether Indian Oil Corporation is worth to Join as a fresher ??
Indian Oil Corporation is quite good for a fresher. work for them, if they employ you, gather sufficient experience and then look for a better and higher paying job
I think this job is perfect for u...
As u r FRESHER,
still u r getting job in INDIAN OIL CORPORATION...
That's good...
and if u r worry about the place where u r placed,
it is necessary..
as u r Chemical engineer,
Chemical industries r always in URBAN area not in RURAL..
And
according to me,
DO THAT...
after 1-2 year experience,
split it out...paper mask
please help......and tell me other good organisations to start my career.Can anyone tell me, being a Chemical Engineer, whether Indian Oil Corporation is worth to Join as a fresher ??
You get the details of the package before hand. It is not wrong to ask for the same before joining. It has become a practise to show high salary package but turn out to be useless as they calculate in terms of the cost to the company. For a fresher, if you get a chance to join there but see the prospects. If there is any bond, think before you leap. Otherwise you do not ask individuals, you try yourself only. You may be misled by others also.
Being a public sector, I hope, it is okay.Can anyone tell me, being a Chemical Engineer, whether Indian Oil Corporation is worth to Join as a fresher ??
Indian Oil Corporation is quite good for a fresher. work for them, if they employ you, gather sufficient experience and then look for a better and higher paying job
I think this job is perfect for u...
As u r FRESHER,
still u r getting job in INDIAN OIL CORPORATION...
That's good...
and if u r worry about the place where u r placed,
it is necessary..
as u r Chemical engineer,
Chemical industries r always in URBAN area not in RURAL..
And
according to me,
DO THAT...
after 1-2 year experience,
split it out...
Why cant the army corp of engineers drill & refine oil for use by the military, fed, state and local govt use?
By doing so it would greatly cut demand in this country on over seas oil and/or the (big bad) oil companies that our leaders speak about. Now that our dependantcy on oil has become a matter of ';national security';, I see no reason why the military should not drill and refine domestic oil. Then fed, state, and local governments could get the gas ';at cost';. This would have a two fold result. 1) Decrease US demand for overseas oil, thus lowering price at the pump. 2) Cut into the windfall profits of the oil companies. I say to our Govt that if you dont like how much money the oil companies are making... then go get your own oil.Why cant the army corp of engineers drill %26amp; refine oil for use by the military, fed, state and local govt use?
They'll never be able to do that as long as so many in Congress are playing footsie with environmental lobbying groups.Why cant the army corp of engineers drill %26amp; refine oil for use by the military, fed, state and local govt use?
I suppose they could if they got the equipment, the knowledge to do so, and the man power. It's not like you just go put a hole in the ground and up pops oil. Also it wqould mean the creation of an entirely new government agency, a completely new government budget.
gas under Hugo Chavez is .17 cents a gallon Yes - you heard that right 17 cents a gallon.
I think you have an excellent idea.
One of the most thoughtful posts I have read concerning oil usage in this counrty, bravo to you.
You agree with Hugo Chavez! Congrats!
That is far too radical for our current political system to adopt.
sure they could but the Dems wouldn't allow it, I am certain!
They'll never be able to do that as long as so many in Congress are playing footsie with environmental lobbying groups.Why cant the army corp of engineers drill %26amp; refine oil for use by the military, fed, state and local govt use?
I suppose they could if they got the equipment, the knowledge to do so, and the man power. It's not like you just go put a hole in the ground and up pops oil. Also it wqould mean the creation of an entirely new government agency, a completely new government budget.
gas under Hugo Chavez is .17 cents a gallon Yes - you heard that right 17 cents a gallon.
I think you have an excellent idea.
One of the most thoughtful posts I have read concerning oil usage in this counrty, bravo to you.
You agree with Hugo Chavez! Congrats!
That is far too radical for our current political system to adopt.
sure they could but the Dems wouldn't allow it, I am certain!
Texaco oil job for graduate engineer.?
nigeriaTexaco oil job for graduate engineer.?
Probably a SCAM.
If you never applied, if they never used your name when they contacted you or if they ask for money - ignore it.
Probably a SCAM.
If you never applied, if they never used your name when they contacted you or if they ask for money - ignore it.
Hydraulic oil flow rate question!? Engineers help!?
Oil flows at a velocity of 8 ft/s through a conduit with an inner diameter of 0.5 in. Determine the flow rate in GPM.
Hydraulic oil flow rate question!? Engineers help!?
volume flow = velocity x cross-sectional area
cross-sectional area = pi x diameter / 4
1 cubic foot = 7.48051945 US gallons
N.B your answer will be in GPS so multiply by 60 to get GPM
Hope this helps!Hydraulic oil flow rate question!? Engineers help!?
Q (Cu. Ft./ sec.) = Vel. x Area
.5 '; = .04166667'
Area = 3.14159 x .04166667^2/4 = .0013635 Sq. Ft.
Q = 8 Ft/sec x .0013635 Sq. Ft = .010908 Cu. Ft /sec
.010908 Cu. Ft./sec x 448.831 = 4.896 GPM
Hydraulic oil flow rate question!? Engineers help!?
volume flow = velocity x cross-sectional area
cross-sectional area = pi x diameter / 4
1 cubic foot = 7.48051945 US gallons
N.B your answer will be in GPS so multiply by 60 to get GPM
Hope this helps!Hydraulic oil flow rate question!? Engineers help!?
Q (Cu. Ft./ sec.) = Vel. x Area
.5 '; = .04166667'
Area = 3.14159 x .04166667^2/4 = .0013635 Sq. Ft.
Q = 8 Ft/sec x .0013635 Sq. Ft = .010908 Cu. Ft /sec
.010908 Cu. Ft./sec x 448.831 = 4.896 GPM
An engineer need some electromagnetic waves to find cracks in the joints of an oil pipline.?
What kind of electromagnetic wave would we use?An engineer need some electromagnetic waves to find cracks in the joints of an oil pipline.?
A process called radiography could be used effectively.
History
Radiography started in 1895 with the discovery of X-rays (later also called R枚ntgen rays after the man who first described their properties in rigorous detail), a type of electromagnetic radiation. Soon after the discovery of X-rays, radioactivity was discovered. By using radioactive sources such as radium, far higher photon energies could be obtained than those which can be obtained from normal X-ray machines. Soon these found various applications, from helping to find shoes that fit, more lasting medical uses and the examination of non-living objects. X-rays and gamma-rays were put to use very early, before the dangers of ionising radiation were discovered. After World War II new isotopes such as Cs-137, iridium-192 and cobalt-60 were made available for use in industrial radiography, hence the use of radium and radon decreased.
[edit] Uses
[edit] Inspection of welds
The beam of radiation must be directed to the middle of the section under examination and must be normal to the material surface at that point, except in special techniques where known defects are best revealed by a different alignment of the beam. The length of weld under examination for each exposure shall be such that the thickness of the material at the diagnostic extremities, measured in the direction of the incident beam, does not exceed the actual thickness at that point by more than 6%. The specimen to be inspected is placed between the source of radiation and the detecting device, usually the film in a light tight holder or cassette, and the radiation is allowed to penetrate the part for the required length of time to be adequately recorded.
The result is a two-dimensional projection of the part onto the film, producing a latent image of varying densities according to the amount of radiation reaching each area. It is known as a radiograph, as distinct from a photograph produced by light. Because film is cumulative in its response (the exposure increasing as it absorbs more radiation), relatively weak radiation can be detected by prolonging the exposure until the film can record an image that will be visible after development. The radiograph is examined as a negative, without printing as a positive as in photography. This is because, in printing, some of the detail is always lost and no useful purpose is served.
Before commencing a radiographic examination, it is always advisable to examine the component with one's own eyes, to eliminate any possible external defects. If the surface of a weld is too irregular, it may be desirable to grind it to obtain a smooth finish, but this is likely to be limited to those cases in which the surface irregularities (which will be visible on the radiograph) may make detecting internal defects difficult.
After this visual examination, the operator will have a clear idea of the possibilities of access to the two faces of the weld, which is important both for the setting up of the equipment and for the choice of the most appropriate technique.
X-ray sources
A high energy X-ray machine can be used. It is often important to use a high accelerating voltage to provide the electrons with a very high energy. This is because in a braking radiation source the maximum photon energy is determined by the energy of the charged particles. A recent development is the betatron, which is a device similar to a cyclotron that acts as a very intense photon source.
See. http://en.wikipedia.org/wiki/Industrial_鈥?/a>
A process called radiography could be used effectively.
History
Radiography started in 1895 with the discovery of X-rays (later also called R枚ntgen rays after the man who first described their properties in rigorous detail), a type of electromagnetic radiation. Soon after the discovery of X-rays, radioactivity was discovered. By using radioactive sources such as radium, far higher photon energies could be obtained than those which can be obtained from normal X-ray machines. Soon these found various applications, from helping to find shoes that fit, more lasting medical uses and the examination of non-living objects. X-rays and gamma-rays were put to use very early, before the dangers of ionising radiation were discovered. After World War II new isotopes such as Cs-137, iridium-192 and cobalt-60 were made available for use in industrial radiography, hence the use of radium and radon decreased.
[edit] Uses
[edit] Inspection of welds
The beam of radiation must be directed to the middle of the section under examination and must be normal to the material surface at that point, except in special techniques where known defects are best revealed by a different alignment of the beam. The length of weld under examination for each exposure shall be such that the thickness of the material at the diagnostic extremities, measured in the direction of the incident beam, does not exceed the actual thickness at that point by more than 6%. The specimen to be inspected is placed between the source of radiation and the detecting device, usually the film in a light tight holder or cassette, and the radiation is allowed to penetrate the part for the required length of time to be adequately recorded.
The result is a two-dimensional projection of the part onto the film, producing a latent image of varying densities according to the amount of radiation reaching each area. It is known as a radiograph, as distinct from a photograph produced by light. Because film is cumulative in its response (the exposure increasing as it absorbs more radiation), relatively weak radiation can be detected by prolonging the exposure until the film can record an image that will be visible after development. The radiograph is examined as a negative, without printing as a positive as in photography. This is because, in printing, some of the detail is always lost and no useful purpose is served.
Before commencing a radiographic examination, it is always advisable to examine the component with one's own eyes, to eliminate any possible external defects. If the surface of a weld is too irregular, it may be desirable to grind it to obtain a smooth finish, but this is likely to be limited to those cases in which the surface irregularities (which will be visible on the radiograph) may make detecting internal defects difficult.
After this visual examination, the operator will have a clear idea of the possibilities of access to the two faces of the weld, which is important both for the setting up of the equipment and for the choice of the most appropriate technique.
X-ray sources
A high energy X-ray machine can be used. It is often important to use a high accelerating voltage to provide the electrons with a very high energy. This is because in a braking radiation source the maximum photon energy is determined by the energy of the charged particles. A recent development is the betatron, which is a device similar to a cyclotron that acts as a very intense photon source.
See. http://en.wikipedia.org/wiki/Industrial_鈥?/a>
Genetically Engineered Foods:Canola oil?
Does anyone know why canola oil was modified?
need it for school :) thanksGenetically Engineered Foods:Canola oil?
It's not the actual oil that was modified, it was the rapeseed plant from which canola oil is made that was modified.
Plants are genetically modified so that they are more productive, disease resistant and possibly drought tolerant. There are lots of qualities and characteristics that plant breeders can select for, and reinforce in successive generations of plants.
In the case of the rapeseed plant, it was modified in the early '90's to be herbicide resistant. This allows farmers to liberally spray their fields with chemicals that are harmful to weeds without killing off their crop of canola oil-producing rapeseed.
There was a large court case a few years ago with the Monsanto corporation regarding their ';Round Up'; ready rapeseed strain that had invaded a neighboring farm -- it was settled for lots of money.
I do recommend looking for sources other than the Wikipedia though.
need it for school :) thanksGenetically Engineered Foods:Canola oil?
It's not the actual oil that was modified, it was the rapeseed plant from which canola oil is made that was modified.
Plants are genetically modified so that they are more productive, disease resistant and possibly drought tolerant. There are lots of qualities and characteristics that plant breeders can select for, and reinforce in successive generations of plants.
In the case of the rapeseed plant, it was modified in the early '90's to be herbicide resistant. This allows farmers to liberally spray their fields with chemicals that are harmful to weeds without killing off their crop of canola oil-producing rapeseed.
There was a large court case a few years ago with the Monsanto corporation regarding their ';Round Up'; ready rapeseed strain that had invaded a neighboring farm -- it was settled for lots of money.
I do recommend looking for sources other than the Wikipedia though.
Do I really need an engine oil change every three thousand mi.? Honda engineers do not say so.?
Are we being told the truth about oil changes for the auto?Do I really need an engine oil change every three thousand mi.? Honda engineers do not say so.?
Mine leaks out before you have to change it as well, but with my last car I used a good synthetic or blended oil and a Fram oil filter that stated it was a long-life filter and didn't need to be changed every 3000 miles and did fine (totaled in a wreck, not engine problems is why I don't have it anymore). How about if it leaks out before 3000 miles, do you still have to change the filter? lolDo I really need an engine oil change every three thousand mi.? Honda engineers do not say so.?
You're supose to CHANGE the oil? I just keep adding to it as it leaks out.
I was told by my mechanic that it could go over that point depending on the type of driving that you do. Driving only in town, where you have to start and stop all the time is rougher on the engine than all highway driving so it would break down the oil faster and then yes you need to change it more. So depending on how you drive, and what year your car is, plus the type or brand of oil used will all have an effect on this. But they also told me not to ever go over 5000 on it. But that was for only highway driving. You should find a mechanic that you really trust and ask them what their opinion is.
Yes. It is crucial to gas mileage.It also helps reduce problems, creates a cleaner exhaust, and it is crucial to your eco-system, since it keeps air cleaner
It depends on how long you want your engine to last. Do you NEED to change it every 3000 miles, no. Should you? That's up to you.
I change mine every 3500 mi and have never had an engine problem. Synthetic oil can be changed every 10,000 mi.
if you use a good oil you can go a little longer,,but you need to use a good oil,,like a synthetic oil,,and you can go about 5 thousand,,but oil changes are important to the life of your vehicle,,if your rich,and don't Care ,,then run it till it gets 20 thousand on a oil change maybe then you,will need a new motor,,this is the difference between changing it,,or not,,hope this help,s.
It's best to change the oil in your car at 3,000 miles because most engines have alluminum parts that wear out faster than stanless steel parts the newer the car is the more alluminum is used to build the car the older cars have iron and steel engine parts that's why back 25 years ago the milage suggested to change oil was 7,500!
that depends on your driving habits. here is my belief, if you allow your car to come up to normal operating temperatures and under normal driving conditons you can go to a comfy 7500 miles. if you get stuck in long deration traffic then 3000 is a better idea. if you do alot of highway driving 7500 is a safe choice. its better oil now then back in the 70's and 80's and damn if we just added oil, changed the filter every now and then. once again my belief and your driving habits. switch to a true synthetic oil and you change the filter every 5000 and top of then change the oil about every 50,000 but the expense of the synthetic oil my not justify it and you have to have at least 30,000 before you can run true syntheticpaper mask
Mine leaks out before you have to change it as well, but with my last car I used a good synthetic or blended oil and a Fram oil filter that stated it was a long-life filter and didn't need to be changed every 3000 miles and did fine (totaled in a wreck, not engine problems is why I don't have it anymore). How about if it leaks out before 3000 miles, do you still have to change the filter? lolDo I really need an engine oil change every three thousand mi.? Honda engineers do not say so.?
You're supose to CHANGE the oil? I just keep adding to it as it leaks out.
I was told by my mechanic that it could go over that point depending on the type of driving that you do. Driving only in town, where you have to start and stop all the time is rougher on the engine than all highway driving so it would break down the oil faster and then yes you need to change it more. So depending on how you drive, and what year your car is, plus the type or brand of oil used will all have an effect on this. But they also told me not to ever go over 5000 on it. But that was for only highway driving. You should find a mechanic that you really trust and ask them what their opinion is.
Yes. It is crucial to gas mileage.It also helps reduce problems, creates a cleaner exhaust, and it is crucial to your eco-system, since it keeps air cleaner
It depends on how long you want your engine to last. Do you NEED to change it every 3000 miles, no. Should you? That's up to you.
I change mine every 3500 mi and have never had an engine problem. Synthetic oil can be changed every 10,000 mi.
if you use a good oil you can go a little longer,,but you need to use a good oil,,like a synthetic oil,,and you can go about 5 thousand,,but oil changes are important to the life of your vehicle,,if your rich,and don't Care ,,then run it till it gets 20 thousand on a oil change maybe then you,will need a new motor,,this is the difference between changing it,,or not,,hope this help,s.
It's best to change the oil in your car at 3,000 miles because most engines have alluminum parts that wear out faster than stanless steel parts the newer the car is the more alluminum is used to build the car the older cars have iron and steel engine parts that's why back 25 years ago the milage suggested to change oil was 7,500!
that depends on your driving habits. here is my belief, if you allow your car to come up to normal operating temperatures and under normal driving conditons you can go to a comfy 7500 miles. if you get stuck in long deration traffic then 3000 is a better idea. if you do alot of highway driving 7500 is a safe choice. its better oil now then back in the 70's and 80's and damn if we just added oil, changed the filter every now and then. once again my belief and your driving habits. switch to a true synthetic oil and you change the filter every 5000 and top of then change the oil about every 50,000 but the expense of the synthetic oil my not justify it and you have to have at least 30,000 before you can run true synthetic
Hi. I'm considering marrying an engineer for an oil company. What would I be letting myself in for?
Well, its like what it says above, except that he's actually a couple of interviews away from being one. I just want to know what that life is like. He says that the companies told him that they are very considerate about letting employees stay fixed when they have families, but others I've spoken to say this just isn't what happens. Also, they said that what would happen would be him going out to the oil rigs for 1 or 2 weeks, and coming back for 1 or 2 etc. What's this like, both before and after kids?Hi. I'm considering marrying an engineer for an oil company. What would I be letting myself in for?
I am married to a rig truck driver and my two grown sons are drillers. They spend weeks at a time on the road working on rig sites. It is just like being married to anyone who is employed at a job where they have to travel alot. Whether they are salesmen, long haul truck drivers or military people the time away doesn't make things easy. As the person who is at home you have to take alot of the responsibility for the maintaince of the home and keeping yourself occupied on yourself. Trust some times can be a big issue. Riggers are a different type of people too. It can be lot rougher of a life style out there. Guys tend to harden up mentally when they aren't in the presence of their spouses much. IT takes them a while to come down from the mind set they get into out there when they come home. Email me if you want to talk about this more......Hi. I'm considering marrying an engineer for an oil company. What would I be letting myself in for?
Yeah, I understand that they go away quite a lot. Some stay on the rig for a couple of weeks and back home for a couple of weeks as you said.
I don'k know if having a family makes any difference.
Good luck.xx
when hillary clinton is president everybody will be switching over to battery powered cars and so your husband will be out of a job.
Do you love this man? I am getting the impression that you do not. Just a word of advice, do not marry if you do not love him. Life will be miserable.
HI THERE
DO NOT KNOW IF ANYONE IN YAHOO HAS ANYTHING TO DO WITH THAT, BUT I just think you should research about couples in oil companies get some feedback. I think people get married for love are you in love?
If so would it matter how you both spend your future ?
talk it out the both of you think and react after you come to some conclusion .
be well be safe god bless
Lonely days and lonely nights.
he's gonna be away for long periods of time then he will seeing women in some of these areas because he'll be stressed and ur not there, he'll have all the money he needs. but some guys aren't like that, so it can work for some people.
it is true..
they leave for weeks .. and sometimes months at a time
but who cares if u love him???
what are u about???
all engineers.. are a different breed.. yes..
I didn't believe it until I was married to one for 12 yrs.. and I couldn't believe it..
I hope u have been with him 2 or 3 years.. and really no him..
think twice about this???
not just the job but the person.... ?
good luck..
lots of gas and oil...hahaha
Dunno.
What's he like - regardless of what he does?
Engineers can be very stoic, conservative and if you don't keep him laughing very serious otherwise he could provide an excellent life. As far as the gas and oil industry goes you could move frequently or get sent to the far reaches of the earth unless he excells and gets an executive position, of course that will take some work.
MONEY !!!! ENGINEERS MAKE BIG BUCKS.....YOU AINT EVEN MARRIED YET AND YOUR WORRIED ABOUT HIM WORKING!
stability and money
If you are basing yhour marriage to some one on their job, you should just do him the favor of leaving him so he can find someone who really loves him, not his income.
lots of gass for your car
Long hours and long trips away, but then long breaks at home! if you are independent and can take care of things at home while he's away, and if you are strong as a couple, it can be a lot of fun! (Believe me, a lot of married couples can use a break now and then. You just drive each other crazy after a while!)
I am married to a rig truck driver and my two grown sons are drillers. They spend weeks at a time on the road working on rig sites. It is just like being married to anyone who is employed at a job where they have to travel alot. Whether they are salesmen, long haul truck drivers or military people the time away doesn't make things easy. As the person who is at home you have to take alot of the responsibility for the maintaince of the home and keeping yourself occupied on yourself. Trust some times can be a big issue. Riggers are a different type of people too. It can be lot rougher of a life style out there. Guys tend to harden up mentally when they aren't in the presence of their spouses much. IT takes them a while to come down from the mind set they get into out there when they come home. Email me if you want to talk about this more......Hi. I'm considering marrying an engineer for an oil company. What would I be letting myself in for?
Yeah, I understand that they go away quite a lot. Some stay on the rig for a couple of weeks and back home for a couple of weeks as you said.
I don'k know if having a family makes any difference.
Good luck.xx
when hillary clinton is president everybody will be switching over to battery powered cars and so your husband will be out of a job.
Do you love this man? I am getting the impression that you do not. Just a word of advice, do not marry if you do not love him. Life will be miserable.
HI THERE
DO NOT KNOW IF ANYONE IN YAHOO HAS ANYTHING TO DO WITH THAT, BUT I just think you should research about couples in oil companies get some feedback. I think people get married for love are you in love?
If so would it matter how you both spend your future ?
talk it out the both of you think and react after you come to some conclusion .
be well be safe god bless
Lonely days and lonely nights.
he's gonna be away for long periods of time then he will seeing women in some of these areas because he'll be stressed and ur not there, he'll have all the money he needs. but some guys aren't like that, so it can work for some people.
it is true..
they leave for weeks .. and sometimes months at a time
but who cares if u love him???
what are u about???
all engineers.. are a different breed.. yes..
I didn't believe it until I was married to one for 12 yrs.. and I couldn't believe it..
I hope u have been with him 2 or 3 years.. and really no him..
think twice about this???
not just the job but the person.... ?
good luck..
lots of gas and oil...hahaha
Dunno.
What's he like - regardless of what he does?
Engineers can be very stoic, conservative and if you don't keep him laughing very serious otherwise he could provide an excellent life. As far as the gas and oil industry goes you could move frequently or get sent to the far reaches of the earth unless he excells and gets an executive position, of course that will take some work.
MONEY !!!! ENGINEERS MAKE BIG BUCKS.....YOU AINT EVEN MARRIED YET AND YOUR WORRIED ABOUT HIM WORKING!
stability and money
If you are basing yhour marriage to some one on their job, you should just do him the favor of leaving him so he can find someone who really loves him, not his income.
lots of gass for your car
Long hours and long trips away, but then long breaks at home! if you are independent and can take care of things at home while he's away, and if you are strong as a couple, it can be a lot of fun! (Believe me, a lot of married couples can use a break now and then. You just drive each other crazy after a while!)
Oil and gas engineer?
how much would one be paid is they are a oil and gas engineer , would they be up around the same money as a mining engineer , would there be lots of chances for jobs and travelOil and gas engineer?
As a petroleum engineer you could expect to make anywhere around $66,970 to $111,910 depending where you work. As a Mining engineer you could expect to make somewhere from $56,420 to $88,080 depending on where you live. Please take into account that these all averages and it is possible to make a lot more or a bit less than what I have listed. Assuming that you live in the US, you would probably travel about the same as you would if you were to pursue a mining degree. As for jobs it would depend on how well you did in school, your experience, ect. Although you have to take into account that you would probably need to get some advanced degrees for either subject to be making the big bucks and traveling a lot. In fact my friend's dad has a PhD in Petroleum engineering and 3 other subjects and he travels a lot and is pretty well off.Oil and gas engineer?
I am a low level engineer on the North Slope in Alaska.
Level IIII civil engineer and I make about 80,000 a year.
As a petroleum engineer you could expect to make anywhere around $66,970 to $111,910 depending where you work. As a Mining engineer you could expect to make somewhere from $56,420 to $88,080 depending on where you live. Please take into account that these all averages and it is possible to make a lot more or a bit less than what I have listed. Assuming that you live in the US, you would probably travel about the same as you would if you were to pursue a mining degree. As for jobs it would depend on how well you did in school, your experience, ect. Although you have to take into account that you would probably need to get some advanced degrees for either subject to be making the big bucks and traveling a lot. In fact my friend's dad has a PhD in Petroleum engineering and 3 other subjects and he travels a lot and is pretty well off.Oil and gas engineer?
I am a low level engineer on the North Slope in Alaska.
Level IIII civil engineer and I make about 80,000 a year.
Subscribe to:
Posts (Atom)